WindTech Microphone Clips

Microphone Windscreens, Mic-Muff's, Microphone Accessories
An American Manufacturing Company Since 1976
Manufactured And Distributed By The Olsen Audio Group, Inc.

Windscreens Mic-Muff PopGard Mic Accessories Camera / ENG Accessories

New Products Dealers Downloads Contact

Adapters Clamps Goosenecks Tie Clips Shockmounts Video Miscellaneous

Microphone Clips

MC-10

High Quality Wireless Microphone Clip (similar to Shure WA371)
with pressure points to accommodate tapered body microphones.
Minimum microphone body diameter is 1.25" (32mm).

MC-2

The MC-2 white microphone clip is made of a soft pliable rubber material and will fit most wireless, and large body type microphones from 32 mm (1.25”) to 44 mm (1.75”) in diameter. Standard 5/8”-27 Female plastic thread and 3/8"-16 adapter included.

MC-3

The MC-3 is made of a soft pliable rubber material. The MC-3 will fit most wireless, and large body type microphones from 32 mm (1.25”) to 44 mm (1.75”). Standard 5/8”-27 Female metal stand insert.

MC-5

A very high quality and cosmetically pleasing microphone holder. Fits most tapered hand held microphones as well as many wireless models from 32 mm (1.25”) to 44 mm (1.75”) [Similar to AKG SA63] Standard 5/8”-27 Female metal stand insert.

MC-9

Our best selling Mic Clip. The very highest quality microphone clip available! Made of virtually unbreakable ABS!! Fits most standard microphones. Standard 5/8”-27 Female metal insert.

MC-12

A great holder that fits most smaller size condenser type microphones [Similar to AKG SA60]. The MC-12 will hold microphones from 18 to 25mm in diameter.

CM-21

Industry standard video Camera Hot Shoe microphone mount.
Fits only 21mm diameter straight microphones.

Fits; AKG C568, CK61, CK62, CK63, CK68 CK69. Audio-Technica AT815b, AT815ST, AT835b, AT897, AT4071a, AT4073a, ATR55. Azden SGM-X, SGM-1X, SGM-2X. Beyer MC836, MC837, MCD837. Neumann KMR81, KMR82.

~~SP-20 Shock Mount~~
DISCONTINUED

Vibration free microphone shockmount for virtually any application. Reduces low frequency rumble, stage vibrations and handling noise. Heavy rubber isolation ring 3/4” (19mm) x 1-1/2” (38mm). Snug fit with 35 lbs. of microphone holding pressure. ~~Threaded metal insert with U.S. standard 5/8”-27 thread. For microphones 20 mm (3/4”) and larger (smaller condenser type). The most practical and cost effective shockmount available!~~

TC-3

Lavalier / Lapel Microphone Tie Clips.
Fits: A/T: ES-942 Sony: ECM-44
Fits most 8 - 8.6mm diameter Microphones
Tie Clip Length is 21mm
3 Per Package

TC-4

Lavalier / Lapel Microphone Tie Clips.
Fits: A/T: AT803, AT831B, Pro70 E/V: RE92
Sony: ECM-55, ECM-66, X7
Fits most 10.2 - 11.5mm diameter Microphones
3 Per Package

TC-5

Lavalier / Lapel / Clothing Microphone Tie Clip
Fits: Microphones with a 1.45mm - 1.70mm diameter cable
(Similar to Audio Technica AT8442)
3 Per Package

TC-6

Lavalier / Lapel Microphone Tie Clips
Fits Auray OLM2 Beyer MCE-50, MCE-600
Pearstone OLM2 Senal OLM2
Sennheiser ME2, ME4 (old version)
Sony UWP-V, ECM-V1
Fits most 6.5 - 7mm diameter Microphones
Tie Clip Length is 34mm
3 Clips Per Package, Black

TC-7

Lavalier / Lapel Microphone Tie Clips
For Mic Cables 1 - 2 mm in diameter
3 Clips Per Package, Black

TC-8

Lavalier / Lapel Microphone Tie Clips
For Mic Cables 1 - 2 mm in diameter
3 Clips Per Package, Tan

TC-9

Lavalier / Lapel Microphone Mount Tie Clips
Cable Mount Rotates 360 degrees
(Similar to Audio Technica AT8440, Shure RPM510)
For Mic Cables 0.8mm - 2 mm in diameter
3 Clips Per Package, Black

TC-10

Lavalier / Lapel Microphone Mount Tie Clips
Cable Mount Rotates 360 degrees
(Similar to Shure RPM512)
For Mic Cables 0.8mm - 2 mm in diameter
3 Clips Per Package, Tan

TC-11

Small Lavalier / Lapel Microphone Tie Clips
Fits Auray OLM2, Pearstone OLM2 Senal OLM2
Sennheiser ME2, ME4 (old version), ME102, ME104, ME105
Sony UWP-V, ECM-V1
Fits most 6 - 6.8mm diameter Microphones
Tie Clip Length is 24mm
3 Clips Per Package, Black

TC-12

Lavalier / Lapel Dual Microphone Soft Mount Tie Clips
Perfect for redundant microphone applications
Cable Mounts Rotates 360 degrees
For Mic Cables 1.3 mm - 2 mm in diameter
2 Clips Per Package, Black

PPA-01 / PPA-02 / PPA-03
Extension Pole Adapters

The PPA-01, PPA-02 and PPA-03 extension pole adapters are
designed to give both Audio and Photo/Video professionals
a new cost effective way to extend the height of an antenna,
camera or microphone. The PPA Series from WindTech® is
designed to fit most standard painters extension poles
(and some broom handles) available at most local hardware
and home improvement stores such as Home Depot or Lowe's.

Tested models include; Wooster Sherlock Pole, Mr. Longarm, Linzer Pro Everlock, Unger Pro Line, Lowe's Quickie Pro Pole and the Home Depot 5' Extension Pole. Please test the adapter before purchasing an extension pole as threads will vary in size.

PPA-01: Acme 3/4"-5 Female to 5/8"-27 Male Microphone Thread
PPA-02: Acme 3/4"-5 Female to either 3/8"-16 or 1/4"-20 Male Adapters
PPA-03: Acme 3/4"-5 Female to 1/4"-20 Male Ball Socket Adapter

windtech windscreens,windscreen,microphone windscreen,microphone,mic windscreen,foam windscreen,mic muff,WindTech,mic-muff,mike muff,olsen,olsen audio,olsen audio group,craig olsen,windshield,microphone windshield,microphone accessories,windscreens,microphone windscreens,mic,shotgun mic,headset,aviation headset,military,military headsets,headsets,wind noise,made in america,softies,softie,softy,microphone softie,mike muff,ham radio,Wind-Tech,Wind Tech,WindTek,Wind-Tek,Wind Tek,WinTech,Win-Tech,Win Tech,Wintek,Win-Tek,Win Tek,wind screen,wind-screen,windsock,wind sock,wind-sock,rycote,video,eng,camcorder,popscreen,pop screen,pop-screen,popfilter,pop filter, pop-filter,mike muff,micmuff,mic-muf,muff,mic muff,foam screen,foam,david clark,betacam,headset,lapel mic,akg,audio-technica,audio technica,audix,azden,beyer,cad,canon,countryman,crown,earthworks,edirol,electro-voice,electrovoice,e/v,dpa,heil,joshephson,jvc,lectrosonics,lightspeed,panasonic,peavey,royer,rode,sanken,sennheiser,sennhieser,shure,shriber,schoeps,sony,studio projects,telex,oktava,neuman,zoom,mic clip,thread adapter,microphone thread adapter,microphone clip,microphone holder,microphone clamp,microphone gooseneck,microphone grill,aviom,canon,clear-com,k&m,manfrotto,mxl,panasonic,sabra-som,perarstone,tecnec,b&h,markertek

Mic-Grip
Microphone / Boom Pole Handle

Mic-Grip™
• 5 Inch Long Soft Foam Ergonomic Handles / Grips
• Light Weight (0.1 Ounce) Aluminum Core
• Thread Adapters Are Included
• Includes Female 3/8"-16 and a Female 1/4"-20 Adapter
• Features Male 5/8"-27 and a Male 3/8"-16 Adapter

SP-25 Shock Mount
Still Available!

Vibration free microphone shockmount for virtually any application. Reduces low frequency rumble, stage vibrations and handling noise. Heavy rubber isolation ring 3/4” (19mm) x 1-1/2” (38mm). Snug fit with 35 lbs. of microphone holding pressure. Threaded metal insert with U.S. standard 5/8”-27 thread. For microphones 25 mm (1”) and larger (standard hand-held size). The most practical and cost effective Shockmount available!

MC-4

A very high quality heavy-duty ABS wireless microphone clip. The MC-4 fits larger microphones up to 1.75" in diameter. Standard 5/8”-27 Female metal stand insert.

MC-15

High quality heavy-duty ABS microphone clip.
The MC-15 fits most standard microphones.
Female 5/8”-27 and 3/8"-16 metal insert.

MC-11

The same ABS material as MC-9 for smaller microphones from .80" to 1" (20mm to 25mm) diameter. Standard 5/8”-27 Female metal insert.

SMC-7

Standard spring clamp type microphone clip. Holds virtually any regular or wireless microphone. Standard 5/8”-27 Female metal insert.

SMC-8

High Quality ABS Composite Locking Microphone Holder
Great for drum overhead or choir overhead mics
Fits most Microphones from 19mm to 38mm in diameter
Extra large clamping area with Neoprene Insulator
Standard 5/8"-27 Female Brass Microphone Stand Insert

~~SP-30~~ ~~Shock Mount~~
DISCONTINUED

Vibration free microphone shockmount for virtually any application. Reduces low frequency rumble, stage vibrations and handling noise. Heavy rubber isolation ring 3/4” (19mm) x 1-1/2” (38mm). Snug fit with 35 lbs. of microphone holding pressure. ~~Threaded metal insert with U.S. standard 5/8”-27 thread. For microphones 30 mm (1-3/16”) and larger (larger body wireless type). The most practical and cost effective shockmount available!~~

Windscreens Mic-Muff PopGard Mic Accessories Camera Accessories

New Products Dealers Downloads Contact

Content copyright 2018. Olsen Audio Group, Inc. All rights reserved.
WindTech® is a Registered Trademark of the Olsen Audio Group, Inc.
Prices and Specifications are subject to change without notice.
Color and Foam Density will vary from different production lots.