New Products!
-
TC-13
Pressure Fit “Snap-In” Type Lavalier / Lapel Microphone Tie Clips Fits Auray OLM2 Pearstone OLM2 Senal OLM2 Sennheiser ME2-US, ME4 (old version), ME102, ME104, ME105. Sony UWP-V, ECM-V1BMP. Fits most 6 – 6.8 mm diameter Microphones 3 Clips Per Package, Black
-
M-21
Stud adapter for the MPC-10 Multi Position Clamp 5/8″-27 Male Thread to 3/8″ Male Stud 1.5″ Total Length, .75″ Stud Length
-
SG-81 / BG-81 Shotgun Windscreens for KMR-81
SG-81 Standard Shotgun Windscreen
Inside Diameter: 0.75″ (19mm)
Inside Depth: 5.5″ (140mm)
Overall Length: 6.5″ (165mm)
Overall Diameter: 2.125″ (54mm)
Colors Available: BlackModel: BG-81 High Wind Shotgun Windscreen
Inside Diameter: 0.75″ (19mm)
Inside Depth: 5.5″ (140mm)
Overall Length: 7.0″ (178mm)
Overall Diameter: 3.0″ (76mm)
Colors Available: BlackFits Neumann KMR-81i and KMR-81D as well as other microphone models with similar dimensions.Made In America!
-
PPA-01 / PPA-02 Extension Pole Adapters
The PPA-01, PPA-02 extension pole adapters are designed to give both Audio and Photo/Video professionals a new cost effective way to extend the height of an antenna, camera or microphone. The PPA Series from WindTech ® is designed to fit most painters extension poles (and some broom handles) available at most local hardware and home improvement stores such as Home Depot or Lowe’s.
Tested models include; Wooster Sherlock Pole, Mr. Longarm, Linzer Pro Everlock, Unger Pro Line, Lowe’s Quickie Pro Pole and the Home Depot 5′ Extension Pole. * Please test the adapter before purchasing an extension pole as thread will vary in size.
PPA-01: Acme 3/4″-5 Female to 5/8″-27 Male Microphone Thread
PPA-02: Acme 3/4″-5 Female to 3/8″-16 or 1/4″-20 Male Adapters -
TC-11
Small Lavalier / Lapel Microphone Tie ClipsFits Auray OLM2, Pearstone OLM2 Senal OLM2Sennheiser ME2, ME4 (old version), ME102, ME104, ME105 Sony UWP-V, ECM-V1Fits most 6 – 6.8mm diameter MicrophonesTie Clip Length is 24mm3 Clips Per Package, Black
-
SM-4
The SM-4 uses high quality Rubber “O” Rings for the Microphone suspension. The angle is adjustable and can be locked into the desired position using the locking knob. Fits most cylindrical style Condenser or short Shotgun microphones from 19 mm (3/4″) to 40 mm (1-9/16″). Standard 5/8″-27 Female microphone stand adapter.
-
SM-4CM
The SM-4CM uses high quality Rubber “O” Rings for the Microphone suspension. The angle is adjustable and can be locked into the desired position using the locking knob. Fits most cylindrical style Condenser or short Shotgun style microphones from 19 mm (.75″) to 31 mm (1.25″). Standard Photo / Video Hot Shoe / Cold Shoe adapter is included.
-
TA-1
3/8″-16 Female to 1/4″-20 Female Thread Adapter.
Converts a Female 3/8″-16 thread to 1/4″-20
3 Per Package. -
TA-2
1/4″-20 Male to 3/8″-16 Male Thread Adapter.
Converts a Male 1/4″-20 Stud to 3/8″-16
3 Per Package. -
BH-1
Mini Ball Head. Ball socket rotates
360 degrees. Locks in any position.
Standard Photo Male 1/4″-20 top thread.
Bottom has 3/8″-16 Female and includes
a 1/4″-20 Female TA-1 thread adapter.
Mounts to both 1/4″-20 and 3/8″16 threads. -
BHC-10
Mini Ball Head with Spring Clamp. Uses BH-1 Mini Ball Head. Spring Clamp opens to 1-1/4″. Rubber edge protector to help prevent scratching.
-
BHC-20
Mini Ball Head with “C” Clamp. Uses BH-1 Mini Ball Head. “C” type Clamp opens to 1-1/4″. Rubber edge protector to help prevent scratching. Clamps to flat or curved surface.
-
FS-1
Standard Photo Flash Hot Shoe Stand.
Includes Female 1/4″-20 thread insert.
-
B-3 Canvas Accessory Bag
Made from 8 ounce Off White Drill, 50/50 Cotton & Polyester blend fabric. Double stitched for extra durability with 2 tie tapes for closure. 6.5” x 13”
Made In America! -
10378 Military High Density
The new WindTech ® 10378, 10378 and 10380 windscreens are designed for use in high wind applications for smaller size (5 – 12mm) lapel, lavalier and headset type microphones. They are made from the same High Density Military Grade S80 SonicFoam™ as is used in our Military—Spec models. They also include a proprietary water repellent / wicking treatment that meets Military requirement standards. Perfect for live broadcast news, outdoor events and general use, as there is virtually no affect to the microphone’s frequency response. The 10378, 10379 and 10380 windscreens offer from 5 to 15db of wind noise protection depending the microphone being used. Made in America!
Inside Diameter: 0.187″ (4.75 mm)
Inside Depth: 0.750″ (19 mm)
Overall Height: 1.100″ (28 mm)
Overall Diameter: 0.750″ (19 mm)
Colors Available: Black
Material: High Density, Military Grade S80 SonicFoam™ Includes proprietary Carnauba water wicking treatment10378 Windscreen Fits the Following Microphones: AKG C407, C417, C577, CK55, CK77-3, CK970, CK99L. Audio Technica AT803B, 830R, 831, 837, 855, 859, AT898, AT899, ATM15, 73A. ES915, ES933, ES943, MT350, PRO7a, PRO70. Audix ADX-5, ADX10, ADX40. TR-40. Auray OLM2. Beyer MC5, MC6, MCE5, MCE10, MCE60. Countryman EMW. Crown GLM100, GLM200. DPA 4060, 4061, 4062, 4063, 4071, 4088, 88, Omni. Earthworks QTC, TC, M. Electro Voice HM-1, OLM-10, RE90L. Gentex 5070. Lectrosonics HM142, HM152, HM162, M119, M140. Lightspeed TX-170. MicW E418, E436, i436, M416. Pearstone OLM2. Ramsa WX-RP410. Samson QV. Senal OLM2. Sennheiser ECM770, HSP4 , ME2, MKE-2, MKE102-60, ME102, ME104, ME105. Shure Beta 53 headset, MC51B, MC50B, WCM-16, WL20, WL50, WL51, WLM10, SM93, 99. Sony ECM-V1, ECM-30 , ECM-44, ECM-77, ECM-322, UWP-V. Special Projects SP5254, SP2000, SP5200, SP5251, SP5252, SP5255, WPHS-746, WPHS-756. Telex EMM-22/33, PH21, 22, 23, WLM30. Tram TR-50. Voice Technologies VT506.
* And most headset, lapel or lavalier type microphones from 5mm to 10mm in diameter.
-
10379 Military High Density
Inside Diameter: 0.250″ (6 mm)
Inside Depth: 0.750″ (19 mm)
Overall Height: 1.100″ (28 mm)
Overall Diameter: 0.750″ (19 mm)
Colors Available: Black
Material: High Density, Military Grade S80 SonicFoam™
Includes proprietary Carnauba water wicking treatment10379 Windscreen Fits the Following Microphones: AKG C407, C417, CK970, CK99L. Audio Technica AT803B, 830R, 831, 837, 855, 859. ATM15, 73A. ES915, ES933, ES943. PRO7a. Audix ADX10, ADX40. TR-40. Beyer MC5, MC6, MCE10. Countryman EMW. Crown GLM100, GLM200. Earthworks QTC, TC, M. Electro Voice HM-1. Gentex 5070. Lectrosonics HM142, HM152, HM162, M119, M140. Lightspeed TX-170. MicW E418, E436, i436, M416. Samson QV. Sennheiser HSP4. Shure SM93, 99, WCM-16. Sony ECM-30. Special Projects SP2000, SP5200, SP5251, SP5252, SP5255, WPHS-746, WPHS-756. Telex PH21, 22, 23. Tram TR-50.
And most lapel or lavalier type microphones with up to .375” (9.5mm) in diameter.
-
10380 Military High Density
Inside Diameter: 0.375″ (10 mm)
Inside Depth: 1.250″ (32 mm)
Overall Height: 1.500″ (38 mm)
Overall Diameter: 0.875″ (22 mm)
Colors Available: Black
Material: High Density, Military Grade S80 SonicFoam™
Includes proprietary Carnauba water wicking treatment
10380 Windscreen Fits the Following Microphones: AKG CK97C,C567. Audio Technica AT853, 803B, 855, 857, 859, ATM35, ATM350, Pro35, U853, U857. Audix M1245, M1290, ADX-20, ADX112, ADX118. Beyer MC5, MC6, MCE10, 52. SHM22, SHM88. Electro Voice RE98, CO90, CO90P, CO94, CO100, CP212, 218, CS200, CH230. RE90H, RE92. MicW CN201, E216, M215, N201, N241. Samson VLP-1, QE. Sennheiser ME34, ME35, MKE40-60. Shure EZG, EZO, MX183, MX184, MX185, MX412. SM83a, SM84a, 839w, SM98, SM99. Sony AH-1, ECM-X7, ECM-44, 55, 66, 166. Special Projects SP4700, SP746, SP756, SPH20.
And most slim-line podium or lavalier style microphones with up to .4375” (12mm) in diameter. -
2600 Series Mini Windscreens
The new WindTech ® 2600 Series mini sized windscreen is designed for use with very small lapel, lavaliere and headset microphones from 2.2mm to 4.9mm in outside diameter. The over all height is less than the diameter of a dime with a hole size of only 2mm.Inside Diameter: 0.0787″ (2 mm)Inside Depth: 0.393″ (10 mm)Overall Height: 0.630″ (16 mm)Overall Diameter: 0.354″ (9 mm)Colors Available: Black, White, TanPackaging: Bulk (Min. 12pcs.) or 3 – Pack2600 Series Windscreens Fit the Following Microphones: Audio Technica BP892, BP893, BP896. Countryman E6, B6, H6, B2, H2. Electro Voice ELM-22, ELM-33. Point Source Audio CO-8WL, CR-8D, CR-8L. Sanken COS-11. Sennheiser MKE1, MKE2 Gold. Sony ECM88. Telex ELM-22, ELM-33. And most lapel, lavalier and headset microphones from 2.2mm to 4.9mm in diameter. -
SMC-8
High Quality ABS Composite Locking Microphone Holder Great for drum overhead or choir overhead micsFits most Microphones from 19mm to 38mm in diameter Extra large clamping area with Neoprene Insulator Standard 5/8″-27 Female Brass Microphone Stand Insert
-
SPS-K2
The SPS-K2 Studio Pop Screen uses a Dual Fabric Filter Design resulting in excellent “P” pop protection while remaining acoustically transparent. The 6” frame diameter allows easy placement. The 15” Gooseneck and Microphone Stand Clamp are Included
-
SP-CM-Series
Cost effective microphone shock mount that will fit any camera or camcorder with a cold shoe or hot shoe mount. SP-20CM: Fits 19mm to 22mm Mics SP-25CM: Fits 25mm to 30mm Mics SP-30CM: Fits 30mm to 35mm Mics Fits Photo Standard Hot or Cold Shoe mounts
-
M-15
Microphone Stand Top Mounting AdapterStandard 5/8″-27 Female Brass Microphone Stand Insert
Overall Height: 1.480″ (38mm)
Overall Diameter: 0.86″ (22mm)
Top Section
Top Stud Height: 0.652″ (21mm)
Top Stud Width: 0.55″ (14mm)
Top Stud Depth: 0.24″ (6mm)
Hole Diameter: 0.24″ (6mm) -
M-13
Photo / Video / Tripod 1/4″ Lock Nut
Large 25mm Diameter Locking Nut
Photo Standard 1/4″-20 Female Thread -
M-14
Microphone / Photo / Video 3/8″ Lock Nut
Large 25mm Diameter Locking Nut
Euro Standard 3/8″-16 Female Thread -
CM-14
Standard Photo Hot Shoe / Cold Shoe to 1/4″-20 Adapter. Includes two knurled locking nuts.
-
CM-38
Standard Photo Hot Shoe / Cold Shoe to 3/8″-16 Adapter. Includes two knurled locking nuts.
-
MC-10
High Quality Wireless Microphone Clip (similar to Shure WA371) with pressure points to accommodate tapered body microphones. Minimum microphone body diameter is 1.25″ (32mm).
-
MC-15
High quality heavy-duty ABS microphone clip.
The MC-15 fits most standard microphones.
Female 5/8”-27 and 3/8″-16 metal insert. -
M-18 Male Thread Converter
The M-18 allows the attachment of microphones
and other audio equipment to photo standard
female threads. 1/4″-20 Male to 3/8″-16 Male. -
M-19
Adapts any standard microphone stand to photo
standard thread. 5/8″-27 Female to 1/4″-20 Male.
Hard Anodized Aluminum, Black. -
M-20
Adapts any standard microphone stand from
5/8″-27 Female to Euro standard 3/8″-16 Male.
Hard Anodized Aluminum, Black. -
Mic-Grip Microphone / Boom Pole Handle
Mic-Grip™
– 5 Inch Long Soft Foam Ergonomic Handles / Grips
– Light Weight (0.1 Ounce) Aluminum Core
– Thread Adapters Are Included
– Includes Female 3/8″-16 and a Female 1/4″-20 Adapter
– Features Male 5/8″-27 and a Male 3/8″-16 Adapter -
Cam-Grip DSLR, GoPro, Video Camera Handle
Mic-Grip™ and Cam-Grip™
– 5 Inch Long Soft Foam Ergonomic Handles / Grips
– Light Weight (0.1 Ounce) Aluminum Core
– Models For Both Microphones and Cameras
– Thread Adapters Are Included
– Both Models Include Female 3/8″-16 and Female 1/4″-20 Adapters
– Mic-Grip Features Male 5/8″-27 and a Male 3/8″-16 Adapter
– Cam-Grip Features Male 5/8″-27 and a Male 1/4″-20 Adapter -
CM-58 Hot Shoe to Microphone Adapter
Standard Photo Hot Shoe to 5/8″-27 Microphone Adapter. Bottom also has a Female 1/4″-20.
-
M-2B
5/8″-27 Female Thread
Standard Microphone Stand Top Nut
Available in Black. -
M-17 GoPro Camera Tripod Adapter
The M-17 allows you to attach a GoPro HERO (3+, 3, 2, 1) Housing or Skeleton Frame to any standard tripod or other 1/4″-20 Male thread. The M-17 can also be used with WindTech ® PPA-02 Pole Adapter as well.
-
MC-2
The MC-2 is made of a soft pliable rubber material and will fit most wireless, and large body type microphones from 32 mm (1.25”) to 44 mm (1.75”) in diameter. Standard 5/8”-27 Female plastic thread and 3/8″-16 adapter included.
-
TC-10
Lavalier / Lapel Microphone Soft Mount Tie Clips
Cable Mount Rotates 360 degrees
For Mic Cables 0.8mm – 2 mm in diameter
3 Clips Per Package, Tan -
TC-9
Lavalier / Lapel Microphone Mount Tie Clips
Cable Mount Rotates 360 degrees
(Similar to Audio Technica AT8440, Shure TwinPlex, RPM510)
For Mic Cables 0.8mm – 2 mm in diameter
3 Clips Per Package, Black -
TC-8
Lavalier / Lapel Microphone Tie Clips
For Mic Cables 1 – 2 mm in diameter
3 Clips Per Package, Tan -
TC-7
Lavalier / Lapel Microphone Tie Clips
For Mic Cables 1 – 2 mm in diameter
3 Clips Per Package, Black -
TC-6
Lavalier / Lapel Microphone Tie Clips Fits Auray OLM2 Beyer MCE-50, MCE-600 Pearstone OLM2 Senal OLM2 Sennheiser ME2-US, ME4 (old version) Sony UWP-V Fits most 6 – 6.5mm diameter Microphones Tie Clip Length is 34mm
3 Clips Per Package, Black -
CC-1
Microphone Stand / Boom Pole Cable Clips Fits 5/8″ to 3/4″ (15mm – 19mm) diameter tubes Such as microphone boom arms and boom poles etc. 8 pcs. Per Package
-
CC-2
Microphone Stand / Boom Pole Cable Clips
Fits 3/4″ to 7/8″ (21mm – 23mm) diameter tubes.
Such as microphone stands and boom poles etc.
6 pcs. Per Package -
CC-3
Microphone Stand / Boom Pole Cable Clips
Fits 1″ to 1-1/4″ (25mm – 30mm) diameter tubes.
Such as larger studio mic stands, light and keyboard stands etc.
4 pcs. Per Package -
B-2 Large Zipper Bag
Large high quality leatherette Vinyl with heavy Nylon zipper. Holds microphones, cables, adapters, accessories etc. 8” x 11” Made In America!
* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.
