Shock Mounts
We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.
We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.
We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.
We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.
We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.
We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.
We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.
-
SM-4
The SM-4 uses high quality Rubber “O” Rings for the Microphone suspension. The angle is adjustable and can be locked into the desired position using the locking knob. Fits most cylindrical style Condenser or short Shotgun microphones from 19 mm (3/4″) to 40 mm (1-9/16″). Standard 5/8″-27 Female microphone stand adapter.
-
SP-25 Shock Mount
Vibration free microphone shockmount for virtually any application. Reduces low frequency rumble, stage vibrations and handling noise. Heavy rubber isolation ring 3/4” (19mm) x 1-1/2” (38mm). Snug fit with 35 lbs. of microphone holding pressure. Threaded metal insert with U.S. standard 5/8”-27 thread. For microphones 25 mm (1”) and larger (standard hand-held size). The most practical and cost effective Shockmount available!
-
SM-2
The SM-2 is a elastic spider type isolation shock mount with a large felt lined spring-clamp microphone holder. Prevents most shock and vibration noise from affecting microphone performance. Adjustable angle can be locked into position using locking knob. A large sub-frame, for extra stability, is suspended with two encased elastic bands. Fits most cylindrical microphones from 42 mm (1.65”) to 48 mm (1.89”). Standard 5/8”-27 Female metal microphone stand adapter. Also mounts to 3/8”-16 euro mic stands. Black powder coat finish.
-
SM-3
The SM-3 is a elastic spider type microphone isolation shock mount with a large rubber lined spring-clamp microphone holder. Prevents most shock and vibration noise from affecting microphone performance. Adjustable angle can be locked into position using locking knob. A large sub-frame, for extra stability, is suspended with two encased elastic bands. Fits most cylindrical microphones from 42 mm (1.65”) to 48 mm (1.89”). Standard 5/8”-27 Female metal microphone stand mount.Champagne Gold powder coat finish.
-
SM-4CM w/Cold Shoe Adapter
The SM-4CM uses high quality Rubber “O” Rings for the Microphone suspension. The angle is adjustable and can be locked into the desired position using the locking knob. Fits most cylindrical style Condenser or short Shotgun style microphones from 19 mm (3/4″) to 40 mm (1-9/16″). Standard Photo / Video Hot Shoe adapter is included.
-
SM-6 Shock Mount
Holds microphones from 35mm to 60mm diameter
Maximum weight 650 grams
Standard microphone thread sizes 3/8″-16 or 5/8″-27The SM-6 is a new larger size elastic spider type isolation shock mount with rubber suspension bands.Helps to prevent most shock and vibration
noise from affecting microphone performance. The spring clip design allows the user to access any controls mounted on the microphone. Adjustable angle can be locked into position using locking knob. A large sub-frame, for extra stability, is suspended with 8 red elastic bands.
Standard 5/8”-27 and 3/8″-16 Female microphone stand threads.Fits most cylindrical microphones from 35 mm (1.37”) to 60 mm (2.36”) up to 650 grams (1.43 lbs.).
-
SP-25 CM w/Cold Shoe Adapter
Cost effective microphone shock mount that will fit
any camera or camcorder with a cold shoe
or hot shoe mount.
SP-25CM: Fits 25mm to 30mm Mics
Fits Photo Standard Hot Shoe and Cold Shoe Mounts
WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.
WINDSCREEN COLORS
TIE-DYE 300 SERIES ONLY
Tie-Dye Blue-23, Tie-Dye Green-24, Tie-Dye Red-25.
MODEL NUMBERS
The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.
* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.
WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.
WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.
MODEL NUMBERS
The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.
* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.
WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.
WINDSCREEN COLORS
TIE-DYE 300 SERIES ONLY
Tie-Dye Blue-23, Tie-Dye Green-24, Tie-Dye Red-25.
MODEL NUMBERS
The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.
* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.
WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.
WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.
NEED EVEN MORE WIND PROTECTION?
WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.
WINDSCREEN COLORS
MODEL NUMBERS
The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.
* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.
