Photo / ENG / Video / DSLR Hardware & Accessories

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

  • B-1 Zipper Bag

    High quality leatherette Vinyl with heavy Nylon zipper.
    Holds microphones, cables, adapters, accessories etc. 5.5” x 10.5”
    Made In America!

  • B-2 Large Zipper Bag

    Large high quality leatherette Vinyl with heavy Nylon zipper.
    Holds microphones, cables, adapters, accessories etc. 8” x 11”
    Made In America!

  • BH-1

    Mini Ball Head. Ball socket rotates
    360 degrees. 
    Locks in any position.
    Standard Photo Male 1/4″-20 top thread.

    Bottom has 3/8″-16 Female and includes
    a 1/4″-20 Female TA-1 thread adapter.
    Mounts to both 1/4″-20 and 3/8″16 threads.

  • BHC-10

    Mini Ball Head with Spring Clamp.
    Uses BH-1 Mini Ball Head.
    Spring Clamp opens to 1-1/4″.

    Rubber edge protector to
    help prevent scratching.

  • BHC-20

    Mini Ball Head with “C” Clamp.
    Uses BH-1 Mini Ball Head. “C” type Clamp
    opens to 1-1/4″.
     Rubber edge protector
    to help prevent scratching.
    Clamps to flat or curved surface.

  • CC-1

    Microphone Stand / Boom Pole Cable Clips
    Fits 5/8″ to 3/4″ (15mm – 19mm) diameter tubes
    Such as microphone boom arms and boom poles etc.
    8 pcs. Per Package

  • CC-2

    Microphone Stand / Boom Pole Cable Clips
    Fits 3/4″ to 7/8″ (21mm – 23mm) diameter tubes.
    Such as microphone stands and boom poles etc.

    6 pcs. Per Package

  • CC-3

    Microphone Stand / Boom Pole Cable Clips
    Fits 1″ to 1-1/4″ (25mm – 30mm) diameter tubes.
    Such as larger studio mic stands, light and keyboard stands etc.
    4 pcs. Per Package

  • CC-6

    Microphone Stand / Boom Pole Cable Clips
    Fits 7/8″ to 1″ (22mm – 25mm) diameter tubes.
    Such as microphone stands and boom poles etc.
    6 pcs. Per Package

  • CM-14

    Standard Photo Hot Shoe / Cold Shoe  to 1/4″-20 Adapter.
    Includes two knurled locking nuts.

  • CM-38

    Standard Photo Hot Shoe / Cold Shoe to 3/8″-16 Adapter.
    Includes two knurled locking nuts.

  • CM-58 Hot Shoe to Microphone Adapter

    Standard Photo Hot Shoe to 5/8″-27 Microphone Adapter.
    Bottom also has a Female 1/4″-20.

  • FS-1

    Standard Photo Flash Hot Shoe Stand.
    Includes Female 1/4″-20 thread insert.

  • GR-1 Cam-Grip DSLR, GoPro, Video Camera Handle

    GR-1 Cam-Grip DSLR, GoPro, Video Camera Handle

    GR-1 Cam-Grip™

    • 5 Inch Long Soft Foam Ergonomic Handles / Grips
    • Light Weight (0.1 Ounce) Aluminum Core
    • Thread Adapters Are Included
    • Includes Female 3/8″-16 and a Female 1/4″-20 Adapter
    • Cam-Grip Features Male 5/8″-27 and a Male 1/4″-20 Adapter
  • M-1

    5/8″-27 Female to
    3/8″-16 Male
    Thread Adapter

  • M-12

    Microphone stand 5/8“-27 female to male 1/4”-20 thread.

  • M-14

    Microphone / Photo / Video 3/8″ Lock Nut
    Large 25mm Diameter Locking Nut

    Euro Standard 3/8″-16 Female Thread

  • M-17 GoPro Camera Tripod Adapter

    The M-17 allows you to attach a GoPro HERO (3+, 3, 2, 1) Housing or Skeleton Frame to any standard tripod or other 1/4″-20 Male thread. The M-17 can also be used with WindTech ® PPA-02 Pole Adapter as well.

  • M-18 Male Thread Converter

    The M-18 allows the attachment of microphones
    and other audio equipment to photo standard
    female threads. 1/4″-20 Male to 3/8″-16 Male.

  • M-19

    Adapts any standard microphone stand to photo
    standard thread. 5/8″-27 Female to 1/4″-20 Male.
    Hard Anodized Aluminum, Black.

  • M-3

    5/8″-27 Male to
    3/8″-16 Female
    Thread Adapter

  • M-6

    Large knurled edge 1/4″-20 lock nut.
    Can be used for any video or still
    camera or tripod accessory.
    High quality aluminum, natural finish.
    Made In America!

  • M-7

    Threaded adapter for lighting stands or camera
    tripods to convert from a male 1/4”-20 to standard
    microphone thread. 1/4”-20 female to 5/8”-27 male.

  • M-8

    Female 3/8″-16 to Male 1/4″-20
    Thread Adapter. Made of Type 303
    Stainless Steel in a natural finish.

  • M-9

    Female 1/4″-20 to Male 3/8″-16
    Thread Adapter
    .  Made of Type 303
    Stainless Steel in a natural finish.

  • MA-358

    Triple Microphone Adapter
    3 Microphone Press Bar, Adjustable Angle

    5/8″-27 Female to Three 5/8″-27 Male

  • MPC-10

    Multi-Position Clamp, 5/8″-27 Male Thread Rotates 90º
    Rubber Insert For Flat or Round Surface Mounting
    Mounts to most 1.25″ Tubes or 1.25″ Table Top
    Great for Press Conference Podium Mounting
    (See M-21 Adapter for replacement parts)

  • PPA-01 / PPA-02 Extension Pole Adapters

    The PPA-01, PPA-02 extension pole adapters
    are designed to give both Audio and Photo/Video professionals
    a new cost effective way to extend the height of an antenna,
    camera or microphone. The PPA Series from WindTech®
    is designed to fit most painters extension poles
    (and some broom handles) available at most local hardware
    and home improvement stores such as Home Depot or Lowe’s.

    Tested models include; Wooster Sherlock Pole, Mr. Longarm,
    Linzer Pro Everlock, Unger Pro Line, Lowe’s Quickie Pro Pole
    and the Home Depot 5′ Extension Pole.
    * Please test the adapter before purchasing an
    extension pole as thread will vary in size.

    PPA-01: Acme 3/4″-5 Female to 5/8″-27 Male Microphone Thread
    PPA-02: Acme 3/4″-5 Female to 3/8″-16 or 1/4″-20 Male Adapters

  • SP25-CM

    Cost effective microphone shock mount that will fit
    any camera or camcorder with a cold shoe
    or hot shoe mount.

    SP-25CM: Fits 25mm to 30mm Mics
    Fits Photo Standard Hot Shoe and Cold Shoe Mounts

  • TA-1

    3/8″-16 Female to 1/4″-20 Female Thread Adapter.
    Converts a Female 3/8″-16 thread to 1/4″-20
    3 Per Package.

  • TA-2

    1/4″-20 Male to 3/8″-16 Male Thread Adapter.
    Converts a Male 1/4″-20 Stud to 3/8″-16
    3 Per Package.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WINDSCREEN COLORS

Grey-01, Off-White-02, Yellow-03, Red-04, Royal Blue-05, Purple-06, Tangerine-07, Orange-08, Brown-09, Pink-10, Green-11, Black-12, Light Grey-13, Navy Blue-14, Mauve-15, French Blue-16, Apricot-17, Sea Green-18, Tan-19, Neon Pink-20, Neon Yellow-21, Neon Green-22.

TIE-DYE 300 SERIES ONLY

Discontinued
Tie-Dye Blue-23, Tie-Dye Green-24, Tie-Dye Red-25.

MODEL NUMBERS

The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

MODEL NUMBERS

The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WINDSCREEN COLORS

Grey-01, Off-White-02, Yellow-03, Red-04, Royal Blue-05, Purple-06, Tangerine-07, Orange-08, Brown-09, Pink-10, Green-11, Black-12, Light Grey-13, Navy Blue-14, Mauve-15, French Blue-16, Apricot-17, Sea Green-18, Tan-19, Neon Pink-20, Neon Yellow-21, Neon Green-22.

TIE-DYE 300 SERIES ONLY

Discontinued
Tie-Dye Blue-23, Tie-Dye Green-24, Tie-Dye Red-25.

MODEL NUMBERS

The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

NEED EVEN MORE WIND PROTECTION?

BG-1 Windscreen with a Mic-Muff MM-101 Fur Windshield shown. Mic-Muff Faux Fur Windshields are available for all WindTech® Shotgun and Big Gun Windscreen Models.
* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WINDSCREEN COLORS

Grey-01, Off-White-02, Yellow-03, Red-04, Royal Blue-05, Purple-06, Tangerine-07, Orange-08, Brown-09, Pink-10, Green-11, Black-12, Light Grey-13, Navy Blue-14, Mauve-15, French Blue-16, Apricot-17, Sea Green-18, Tan-19, Neon Pink-20, Neon Yellow-21, Neon Green-22.

MODEL NUMBERS

The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.